GE JVB94 Owner's Manual And Installation Instructions page 4

Usingthe downdraft system.
Onsomemodels,flTeRaise/Lower
switchis located at the top right of
the vent.
Raise/Lower Switch (30" models only)
Turn the downdrafl blower
ON by pressing
the _aise/lower switch located at the top
fight ot the vent. Place your finger on the
"center" (ff the switch and hold until you
obseive the vent moving, then release.
Tile air vent will vise. Llse the selector switch
to tt/rn the blower ON,
OFF
(>r t(> change
the blower speed.
Tile vent may be lowered by again pressing
the raise/lower switch at tile top right side
of the vent. The bl(>wel; if left on, will
automatically go off when the vent is
lowered.
NOTE: Formostconvenient operation, set the
Mowerto thespeedyouusemostoften.The
Mowerwill comeonto thisspeedwhenever
theunit is ral2ed
Use the selector switch to turn the
blower ON, OFFer to change the
blower speed,
Raise/Lower s witchlocation
may vary,
Remote Raise/Lower Switch (36"modelsonly)
The 36" models have a remote raise/lower
switch. It operates in the same manner as
the switch located on the vent. This switch
may be located beside the cooktop or in a
convenient location.
Using the Cooktop
A CAUTION: 8 ecarefulwhenra,sleg
or Iowenng the downdraft. Be surepots, pot handles
and other objects are clear of the downdraft
and cannot be strock or tipped by the downdraft
beleg raised
NOTE:There _ a shghttn#7
overhangat
eachend
of the vent.
Toavoidinjury,be sure fingersareclear
ofthe downdre#cover whenit is being
lowered.
Keephandsandfingersaway fromall
downdreft p arts.
4