Control Knobs; Control Panel; Surfaces - GE Quick Set V Owner's Manual

Care and cleaning of the range.
Be sure all controls are off and all surfaces are cool before cleaning any part of the range.
I-4,WARNING
I f_lour range is removed for cleaning, servicing or any
reason, be sure the anti-tip device is reengoged properly
when the range is replaced. Failure to take this precaution
could result in tipping of the range and cause injur_l.
36
How to Remove Protective Shipping Film and Packaging Tape
Carefullygraspa cornerof the protective Toensureno damageisdoneto the finish
shippingfilm with your fingersand slowlypeel of the product,the safestway to remove
itfrom the appliancesurface. D onot useany the adhesive from packaging tape on new
sharpitemsto removethe film.Remove all appliances isan application of a household
of the film beforeusingtheappliance liquiddishwashing detergent.Applywith a soft
for the firsttime. cloth and allowto soak.
NOTE: Theadhesive must beremoved from all
ports.It cannotberemovedif it isbakedon.
Control Knobs
Thecontrolknobsmay be removed for easier
cleaning.
Makesurethe knobsare in the OFF positions
and pullthem straightoff the stemsfor
cleaning.
Theknobscanbe cleanedin a dishwasher o r
they may alsobe washedwith soapand water.
Makesurethe insideofthe knobsare dry
beforereplacing.
Replace the knobs,in the OFFposition to
ensureproperplacement.
Control Panel
If desired, t hetouchpadsmabl b e deactivated
beforecleaning.
See the ControlLockoutinformationin the Using
theclock,kitchentimerand controllockout
sectionin this manual.
Cleanup splatterswith a dampcloth.
Youmay alsousea glasscleaner.
Removeheaviersoilwith warm,soapywater.
Donot useabrasives of any kind.
Reactivate thetouch _adsafter cleaning.
Painted Surfaces
Painted surfacesincludethe sidesd the range
and the door,top of controlpanelandthe
drawerfront.Cleanthese with soapand water
or a vinegarand watersolution.
Donot usecommercial o vencleaners, c leaning
powders,steelwoolor harshabrasives on any
paintedsurface.
Stainless Steel Surfaces Ion some models)
Do not use a steel wool pad; it will
scratch the surface.
To clean the stainless steel surface, use
warm, sudsy water or a stainless steel
cleaner or polish.Always wipe the surface
in the direction of the grain. Follow the
cleaner instructions for cleaning the
stainless steel surface.
To inquire about purchasing stainless steel
appliance cleaner or polish or to find the
location of a dealer nearest you, please
call our toll-free number:
National Parts Center 1.800.626.2002
GEAppliances.com
Porcelain Enamel Cooktop Ionsome modelsl
The porcelain enamel finish is sturdy
but breakable if misused. This finish is
acid-resistant. However,any acidic foods
spilled (such as fruit juices, tomato or
vinegar) should not be permitted to
remain on the finish.
If acids spill on the cooktop while it is hot,
use a dry paper towel or cloth to wipe it up
right away. When the surface has cooled,
wash with soap and water. Rinsewell.
Forother spills such as fat spatterings,
wash with soap and water or cleansing
powders after the surface has cooled.
Rinsewell. Polishwith a dry cloth.