Oven Heating Elements - GE Quick Set V Owner's Manual

GEAppliances.com
I,_ I SHOCKORBURN HAZARD:Before replacing oven light bulb, disconnect the
WARNING
I electrical power to the range at the main fuse or circuit breaker panel. Failure to
do so may result in electric shock or burn.
Oven Light Replacement (on some models)
Be sure to let the light cover and bulb cool
completely.
To remove the coven
', i [] Twist lens counterclockwise about
a quarter turn to remove.
Do not remove ang screws to remove
the cover.
[] Replacebulb with a 40-watt
appliance bulb or two-prong halogen
bulb, as appropriate.
To replace the cover:
Line up tabs of lens in front of tabs
on housing and rotate clockwise
to engage.
_i! iii
i_i i i
Oven Heating Elements (on some models)
Do not clean the bake element or the broil
element.Ang soil will bum off when the
elementsore heated.
To clean the oven floor, gentlg lift
the bake element. Clean with warm,
soapy water.
Wipe up heavysoil on the oven bottom.
Oven Heating Elements (on some models)
Do not clean the broil element. Any soil will
burn off when the element is heated. Clean
the oven floor with warm, soapy water.
On some models, the bake element is
not exposed and is under the oven floor.
If spillovers, residueor ash accumulate on
the oven floor, wipe up before self-cleaning.
If the element is above the oven floor, gent!g
lift the bake element and clean with warm,
soapg water.
41