GE Appliances JVE40 Owner's Manual And Installation Instructions page 8

Installation Instructions
DAMAG E-SH IPM ENT/I NSTALLATIO N
, If the unit is damaged in shipment, return the unit to the
store in which it was bought for repair or replacement.
, If the unit is damaged by the customer, repair or
replacement is the responsibility of the customer.
If the unit is damaged by the installer (if other than
the customer), repair or replacement must be made
by arrangement between customer and installer.
MOUNTING SPACE
66" or
more from
the floor to
the top of
the hood
J
Bottom edge of
cabinet needs
to be 30" or
more from
the cooking
NOTES:
, This range hood is for installation over ranges up to 30"
wide.
If you are going to vent your range hood to the outside,
see the "Ducting Requirements" section for exhaust duct
preparation.
TOOLS YOU WILL NEED
Flat blade and Phillips Pencil
screwdrivers
Saw(saberor Electricdrill
keyhole)
!/4" pivoting Pliers Tape measure
hex socket
Duct tape
Metal snips
(in some
applications)
Wire stripper
Flashlight Caulking Level !/4" Nutdriver
PARTS INCLUDED
PART QUANTITY
Metal Grease Filters 2
_ Mounting Screws 4
Exhaust Adaptor/Damper 1
(for 3W' x !0" rect. venting)
I_ Exhaust Adaptor Screws 1
OPTIONAL ACCESSORIES
This kits can be ordered from your GEsupplier.
Charcoal Filters If recirculating
order Kit no. WBO2X11000
Note: tf the hood in installed for recirculation
mode, it is not ENERGY STAR ® certified.
8