Charcoal Filters; Hood Lights; Hood Surfaces; Stainless Steel Surfaces - GE JV536 Owner's Manual And Installation Instructions

The charcoal filters are clipped inside
of each reusable metal grease filter.

Charcoal Filters

(on some models)
The charcoal filters
cannot be cleaned. They
must be replaced.
For 30 " hood models, order
Kit no. WB02X10707.
For 36 " hood models, order
Kit no. WB02X10708.
These kits can be ordered
from your GE supplier.
Painted Surfaces
(on some models)
To clean the hood surface, use a hot,
damp cloth with a mild detergent
suitable for painted surfaces. Use a
clean, hot, damp cloth to remove
soap. Dry with a dry, clean cloth.

Stainless Steel Surfaces

Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface,
use warm sudsy water or a stainless steel
cleaner or polish. Always wipe the
surface in the direction of the grain.
Follow the cleaner instructions for
cleaning the stainless steel surface.

Hood Lights

This hood requires two bulbs (not
included), maximum 50 watts.
Purchase and install PAR20, 50 W
Maximum halogen bulbs.
When replacing a bulb, let it cool
first. Make sure that power to the
light has been turned off. Never
allow a hot bulb to come into
contact with water.
5
If the model is not
vented to the outside, the
air will be recirculated
through disposable
charcoal filters that help
remove smoke and
odors.
Do not use steel-wool pads or other
abrasive cleaners. They will scratch
the surface. Wipe with a clean, hot,
damp cloth after using cleansers.
(on some models)
To inquire about purchasing stainless
steel appliance cleaner or polish, or to
find the location of a dealer nearest
you, please call our toll-free number:
National Parts Center
1.800.626.2002
ge.com
To change the light bulbs:
Grasp the bulb on the edges and
unscrew it.
Replace with the same size bulb.
CAUTION:
I
Do not touch the hood light bulbs when they
are on. They may be hot enough to cause
injury.
I
The light bulbs operate at extremely high
temperatures. If they shatter, the hot glass
could cause personal injury.
The charcoal filters
should be replaced when
they are noticeably dirty
or discolored (usually
after 6 to 12 months,
depending on hood
usage).
NOTE: DO NOT rinse, or
put charcoal filters in an
automatic dishwasher.