Table of Contents
Advertisement
seconds to trigger auxiliary output 2. The vehicle's parking lights will flash once indicating that the
auxiliary outputs have been triggered.
The system is in secure auxiliary mode, which requires you to hold buttons
for 2.5
seconds prior to triggering auxiliary 1 or 2.
Anti Grind
The optional anti-grind feature prevents you from accidentally grinding your vehicle's starter motor when
taking over with the key. This feature requires additional installation and programming. Also your dealer
can program a basic security feature that prevents your vehicle from starting when it is locked/armed.
Please see your dealer for more details.
Timer Start Mode
Timer start mode is used to cool or warm the vehicle without manually starting with the key or
from the remote. While engaged, timer start will activate even while the remote is out of range.
Hold buttons
simultaneously for 2.5 seconds to activate timer start mode. Timer start
mode will be cancelled any time the vehicle is started manually or remotely. To change from the default
setting to optional settings, see your local Firstech dealer.
Default 1: Will start every 3 hours for a 24 hour cycle, or until the vehicle is remote started or started by
key, and run for whatever your remote start run time is set for.
Option 2: Will start every 1.5 hours for a 24 hour cycle, or until the vehicle is remote started or started by
key, and run for whatever your remote start run time is set for.
Drive Lock/Ignition Controlled Door Locks
Drive Lock/Ignition Controlled Door Locks all your power door locks to when the vehicle is started and
foot is placed on the brake. When you turn your vehicle off the doors will unlock. This feature may require
addition parts and labor. Please visit your place of purchase for details.
IMPORTANT: Drive lock mode requires that the dealer turn on Option 2-3. Drive lock has two settings;
Default 1: Off
Option 2: Locks the doors when the ignition is on and after the brake is depressed.
Remote Coding / Programming Routine(s)
IMPORTANT: The CS-600 remotes are preprogrammed to your system. In the even you need to
program your remotes follow this simple procedure below.
Programming CS-600
STEP 1: Activate Valet/Programming mode by manually turning the ignition key on and off (between the
Acc & On positions) five times within 7 seconds. The vehicle's parking lights will flash once with the
successful completion of this step.
th
STEP 2: Within a second after cycling the ignition for the 5
time, tap the Lock button once for 0.5
second. The parking lights will flash once to confirm the transmitter has been coded.
7
Hide quick links:
Advertisement
Table of Contents
