Controls-Dip Switches - GE Appliances Zoneline 8500 series Owner's Manual

Controls-dip switches.
GEAppliances.com
Controls-Dip Switches
The dip switch controls are located behind
the front case panel, through an opening
on the front of the unit.
To access the dip switches, remove the front
case panel by removing the filter, taking out
the four front screws, the upper two screws from
the top of the panel and the shipping screws on
each side, if present. (Discard the four side shipping
screws, if present).
Side
---._shipping
screw
,/
NOTE:The owner is responsible for setting
the appropriate dip switches and connecting
terminals.
TL3 (C)(Temp. Limit 3-Cool)
TL2 (C)(Temp. Limit 2-Cool)
TL! (C)(Temp. Limit i-Cool)
TL! (H)(Temp. Limit 1-Heat)
_TL2 (H)(Temp. Limit 2-Heat)
_TL3 (H)(Temp. Limit 3-Heat)
ALL 12R(All Electric Heat)(Heat-pump models only)
FREEZ S (Freeze Sentinel)
CONST FAN (Constant ON Fan)
DOWN
_J I J I [ j_ N°Functi°n(Reservedf°rfutureuse)_ DUCT (BlowerFan)
OCCUPIED (OccupancySensor)
All Electric Heat (Heat pump models only)
When this switch is enabled (UP), h eat pump
operation is locked out, causing the unit to provide
only electric resistance heat.
[BBBBBBII BBBBBI ooO .
hALL 12R (AllElectricHeat)