Servicing - GE Appliances Zoneline 8500 series Owner's Manual

Installation Instructions
m
FINAL CHECK
Reviewthis Checklist before restoring power.
. Correct line voltage?
Single circuit only?
HVACRtype breaker/fuse7
Ductwork connected?
Case and unit level7
Wall plenum caulked7 Level7Flashing7
Drain connected?
Wall thermostat wired correctly?
Unit wired correctly7
Hydronic plumbing connections (if applicable)
Hydronic wiring connections (if applicable)
CONNECT POWER
1. If all the above items are correct, turn the power
on at the main service panel.
2. Turn the unit power switch, on the front of the unit,
to ON by pressing the top of the switch in.
SERVICING
WARNING:Risk of Electric
Shock,
can cause injury or death. Before servicing,
switch power off at the service panel and lock
the area to prevent power from being switched
on accidentally. When the area cannot be locked,
securely fasten
u prominent warning device, such as a tag,
to the service panel.
NOTE:We strongly recommend that any servicing
be performed by a qualified individual.
For ease of service,the unit can be removed
from the case:
1. Removethe front case panel.
2. Unplug the power cord and disconnect the wall
thermostat connections.
3. Raisethe top duct by turning all four case top duct
adjusting screws counterclockwise.
4. Removethe front and/or side case-to-unit grounding
screw, if present.
5. Slide the unit out of the case.
22