Displaying the Connection Status
Displaying the Connection Status
You can confirm the connection status of the network and peripheral devices.
1
Press [Status].
•
The connections status screen is displayed. An
"X" mark is displayed next to any network or
peripheral devices connection that is not in normal
operation or not connected.
Example: The Boundary Microphone connection is
not normally operating.
Note
•
"MIC" displays the connection status of the
Boundary Microphone or headset only. The
connection status of general-purpose
microphones is not displayed.
•
If the MIC detection setting has been disabled
through system settings, the connection status
of the Boundary Microphone or headset will not
be displayed (Page 90).
2
Press [Back].
•
The display returns to the screen in use before the
connections status screen was viewed.
78
User Manual
1
2