Panasonic KX-VC300 User Manual page 72

Displaying Other Video Sources
Note
(When using the KX-VC300/KX-VC600)
•
When connecting to an MCU or non-Panasonic video
conference system, the same screen may not be shown
on the other party's display depending on the other
party's screen layout. Ask the other party to change their
screen layout to display your computer's screen.
•
When connecting to an MCU or non-Panasonic video
conference system, you may not be able to display the
computer's screen on the other party's display. An error
message is displayed. To return to displaying your main
video camera's image, press [Enter].
•
Pressing [Full Screen] on the remote control will hide
or unhide the other party's information, duration, and
guide displays.
•
When connecting to another Panasonic HD Visual
Communication Unit:
–
While displaying your computer's screen, the other
party cannot press [PC] to display their own
computer's screen.
–
If a sub video camera is connected, you can also
switch to the sub video camera's image by pressing
[Camera Sub] (Page 74). Only the party that
pressed [PC] can perform this operation. To return
to displaying your computer's screen, press [PC].
–
While displaying your computer's screen, you can
switch to displaying the other party's image in
Layout 1 by pressing [B] (Page 50, Page 52,
Page 55). However, the other party cannot perform
this operation, and the other party cannot confirm if
you are viewing your computer's screen or the other
party's image. When viewing the other party's
image, the screen layout is fixed to Layout 1. To
return to displaying your computer's screen, press
[B].
72 User Manual