Troubleshooting - Montigo L42DF Installation & Maintenance Manual

Troubleshooting: (SIT Nova 820).
The following is a troubleshooting chart of possible problems:
PROBLEM
Noisy Pilot Flame
Pilot won't ignite
Main burner will not ignite
Troubleshooting: (IPI System).
The following is a troubleshooting chart of possible problems:
PROBLEM
Pilot won't ignite or spark.
Main burner will not light.
Fan not working
If your fireplace still does not operate correctly, consult your dealer or
the manufacturer.
XG0181 - 112811
Maintenance
Models
L42DFN
L42DFL
SOLUTION
Locate pilot adjustment screw on gas
control valve. Flame is decreased by
turning adjustment screw clockwise.
Disconnect remote wires and try to
light pilot. If pilot now works, remote
connections are faulty. Check wiring
diagram figure 33.
1. Check wiring (see figure 33).
2. Check wall switch for proper
connection.
SOLUTION
- Check the on the batteries on the
remote or the reciever.
- Check the green LED on AC adaptor
-Check the green ground wire under
the valve
- Check the wiring on the valve as per
diagram
- Make sure the fan speed control is on.
- 10 minute delay to turn on.
L42DF* Indoor Gas Fireplace
Page 25