Models
L42DFNI
L42DFLI
Wiring for the optional Fan Kit
All L42DF* fireplaces may be equipped with optional fan kits for circulating
heat into the living space.
Installations in Canada which employ the fans must be electrically
grounded in accordance with CSA C22.1 Canadian Electrical Code Part
1 and/or Local Codes.
Installations in the USA which employ the fans must be grounded in
accordance with local codes or, in the absence of local codes, with the
National Electrical Code, ANSI/NFPA 70-1987.
For more information see the Fan Kit Installation Guide included with
the fan kit.
NOTE: If any of the original wire supplied with the appliance is replaced,
it must be replaced with the same type, or its equivalent.
5/1/60 Supply
G
L1 L2
Quick Connect
Figure 21a. Wiring schematic for optional fans.
XG0181 -112811
Installation
Figure 21. Wiring for the SIT IPI Wiring Schematic
L2-WH
G
L1-BLK
p g
lu to motor
Top / Rear Intake Air Adjustment
The L42DF has a Intake Air Vane to modify the Incoming air. This will
ensure the flame is as per the design criteria. See Figures 22 & 22a.
Figure 22. Closed Vane for Top Vent Fireplaces.
Figure 22a. Open Vane for Rear Vent Fireplaces.
L42DF* Indoor Gas Fireplace
Section 4: Wiring
Page 17