Troubleshooting; Sit- Nova 820 Gas Control Valve; Sit Proflame Electronic Gas Control Valve; Honeywell Gas Control Valve - Montigo H38DF ST Installation & Maintenance Manual

Troubleshooting

SIT Nova 820
The following is a troubleshooting chart of possible problems:
PROBLEM
Noisy Pilot Flame Locate pilot adjustment screw on
gas control valve. Flame is decreased by
turning adjustment screw clockwise.
Pilot won't ignite Disconnect remote wires and try to
light pilot. If pilot now works, remote
connections are faulty. Check wiring
diagram figure 28.
Main burner will 1. Check wiring (see figure 28).
not light 2. Check wall switch for proper
connection.
SIT Proflame
The following is a troubleshooting chart of possible problems:
PROBLEM
Pilot won't ignite or spark.
Main burner will not light.
Fan not working
All spare parts, optional fans, and optional trim finishes are available from your local Montigo dealer.
XG0207 - 011012.1
Maintenance
CORRECTIVE ACTION
SOLUTION
- Check the on the batteries on the
remote or the receiver.
- Check the green LED on AC adaptor
-Check the green ground wire under
the valve
- Check the wiring on the valve as per
diagram Figure 17.
- Make sure the fan speed control is on.
- 10 minute delay to turn on.
If your fireplace still does not operate correctly, consult your local Montigo dealer.
All service and repairs should be performed by a qualified Technician.
Honeywell
The following is a troubleshooting chart of possible problems:
H*38DF ST Indoor Gas Fireplace
Page 27