Section 8: Installing The Accessories; Installing The H42Df-St Log Set - Montigo H42DF ST Installation & Maintenance Manual

Section 8: Installing the Accessories

Installing the Logs and Embers
Bottom Logs
The H*42DF*-ST is supplied with eight (8) fibre logs. The two bottom
logs ("A" & "B") are mounted on the burner grate as shown in Figure 23.
Top Logs
Place logs "C" into their diagonal positions as shown in Figure 23b. Logs
"E" are mounted on top of logs "A" , "B", "C" & "D" as shown in Figure 24c.
Log B
Front of Fireplace
Figure 23. Log "A" & "B" Installation.
Log C
Figure 23a. Log "C" Installation.
Log D
Figure 23b. Log "D" Installation.
XG0237 - 120611.1
Installation
Log A
Log C
Log D
Log E
Figure 23c. Completed Installation.
Installing the Ember Material
The ember material is supplied in two packages. Place the material
evenly within the internal area of the burner, next to logs 'A' and 'B'.
Refer to figure 23a. Ensure that the burner holes of the burner are not
covered and the flame pattern burns properly after placing the embers.
NOTICE
If logs are not placed properly, excessive sooting will result.
H*42DF ST Indoor Gas Fireplace
Log E
Page 21