Option Setup - Marantz SR5006 Owner's Manual

ZONE2 Setup
Set the audio to play back with multi-zone (ZONE2).
• "ZONE2 Setup" is displayed when "ZONE2" is selected with "Amp Assign" (vpage 92).
Setting items
Lch Level –12dB – +12dB (0dB)
Adjust the left channel
output level.
Rch Level –12dB – +12dB (0dB)
Adjust the right channel
output level.
Volume Limit OFF : Do not set a maximum volume.
Make a setting for
–20dB (61) / –10dB (71) / 0dB (81)
maximum volume.
This is displayed from 0 to 99 when "Volume Display" (vpage 101)
is set to "Absolute".
Power On Level Last : Use the memorized setting from the last session.
Define the volume setting – – – (0) : Always mute when power is turned on.
that is active when the –80dB – 18dB (1 – 99) : The volume is adjusted to the set level.
power is turned on.
This is displayed from 0 to 99 when "Volume Display" (vpage 101)
is set to "Absolute".
Mute Level Full : The sound is muted entirely.
Set the amount of –40dB : The sound is attenuated by 40 dB down.
attenuation when muting –20dB : The sound is attenuated by 20 dB down.
is on.
BD
Default settings are underlined.
Setting details
101

Option Setup

Make various other settings.
Setting items
Volume Control Volume Display : Set how volume is displayed.
Set the MAIN ZONE (room • Relative : Display ---dB (Min), in the range –80.5 dB to 18 dB.
where the unit is located) • Absolute : Display in the range 0 (Min) to 99.
volume setting.
• The "Volume Display" setting is applied also to the "Volume Limit" and
"Power On Level" display method.
• The "Volume Display" setting applies to all zones.
Volume Limit : Make a setting for maximum volume.
• OFF : Do not set a maximum volume.
• –20dB (61) / –10dB (71) / 0dB (81)
Power On Level : Define the volume setting that is active when the
power is turned on.
• Last : Use the memorized setting from the last session.
• – – – (0) : Always use the muting on condition when power is turned on.
• –80dB – 18dB (1 – 99) : The volume is adjusted to the set level.
Mute Level : Set the amount of attenuation when muting is on.
• Full : The sound is muted entirely.
• –40dB : The sound is attenuated by 40 dB down.
• –20dB : The sound is attenuated by 20 dB down.
Source Delete BD / DVD / VCR / SAT / GAME / AUX / NET/USB / TV / CD / TUNER /
Remove from the display M-XPort : Select input source that is not used.
input sources that are not • ON : Use this source.
used. • Delete : Do not use this source.
NOTE
• Input sources being used in the various zones
cannot be deleted.
• Input sources set to "Delete" cannot be
selected using the input source select button
SOURCE df
or
System Setup
Default settings are underlined.
Setting details
.
vSee overleaf