Fleetsync: Alphanumeric 2-Way Paging Function - Kenwood TK-7360 Instruction Manual

2 Press the key programmed as Selcall.
3 Press / (if the key assignment list selection is configured as "Enabled") or
<B/C> to select the ID of the station you want to call.
• You can also enter the station ID directly by using the keypad.
4 Press the key programmed as Call 1 to Call 3 to begin your call.
my id
Your dealer can program an ID number for your transceiver, to identify you to
other parties when you make a call. If set by your dealer, you can edit the ID.
1 If the ID number can be edited, it will appear on the display when you turn the
transceiver power ON.
2 Press <B or C> to select the digit you want to change, then press /
decrement the number.
3 Press S or
t
rAnSmitting
1 Select your desired zone and channel.
2 Press the key programmed as Selcall.
3 Press <B or C> to select a digit, then press /
number.
4 Press S to complete the entry.
5 Press the key programmed as Call 1 to Call 3 and begin your conversation.
Note: Additionally, you can also use the keys programmed as Digit 1x Down, Digit 1x Up,
Digit 10x Down, and Digit 10x Up to adjust the Selcall number. Digit 1x Up/Down increases/
decreases the Selcall number by  each time the key is pressed. Digit 10x Up/Down increases/
decreases the Selcall number by 0 each time the key is pressed.
r
eceiVing
When you receive a signal containing the correct tones, squelch opens and you
will hear the call. To respond to the call, press the PTT switch and speak into the
microphone.

FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION

FleetSync is an Alphanumeric 2-way Paging Function and is a protocol owned by
Kenwood Corporation.
Note: If set up by your dealer, your transceiver may use the MDC-200 feature in place of
FleetSync. MDC-200 and FleetSync cannot be operated simultaneously.
S (S
elcAll electiVe
A Selcall is a voice call to a particular station or to a group of stations.
to complete the entry.
c )
Alling
to increment/decrement the
to increment/