Fleetsync: Alphanumeric 2-Way Paging Function - Kenwood NEXEDGE NX-200S Instruction Manual

FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION

Note:
This function is available only in analog operation.
Ask your dealer for further information regarding the
NX-200S/ NX-300S.
SELCALL (SELECTIVE CALLING)
A Selcall is a voice call to a station or group of stations.
Transmitting (NX-200/ NX-300 Only)
1 Select your desired zone and channel.
2 Press the key programmed as Selcall or Selcall +
Status to enter Selcall mode.
3 Press
• On keypad models, if Manual Dialing is enabled, you can
directly enter the station ID.
4 Press the PTT
Receiving
respond to the call by pressing the PTT
speaking into the microphone.
Identification Codes
Kenwood Corporation.