Background Operations - Kenwood TK-7360 Instruction Manual

p A
ublic ddreSS
The PA system can only be used with an external speaker.
1 Press the key programmed as Public Address to activate the Public Address
function.
• The icon appears on the display.
2 Press and hold the PTT switch, then speak into the microphone to make your
address through the external speaker.
3 Press the Public Address key again to exit Public Address.
h A
orn lert
Press the key programmed as Horn Alert to toggle the Horn Alert function ON or
OFF.
• The icon appears on the display while Horn Alert is activated.
e S
xternAl peAker
After attaching an external speaker to the transceiver, press the key programmed
as External Speaker to output all received signals through the external speaker.
• The
Press the External Speaker key again to output all received signals only through
the built-in speaker.
lcd b
rightneSS
You can cycle the display brightness between high, low, and off by pressing the
key programmed as LCD Brightness.
t - t
ime out imer
The Time-out Timer prevents you from using a channel for an extended duration.
If you continuously transmit for a preset time, the transceiver will stop transmitting
and an alert tone will sound. Release the PTT switch.
A p
uxiliAry ort
Press the key programmed as AUX to activate the auxiliary port. The auxiliary
port is used with optional boards.
• The
b c
uSy hAnnel
If BCL is set up by your dealer, you will be unable to transmit if the channel is
already in use.
6
(pA)
icon appears on the display.

BACKGROUND OPERATIONS

(tot)
icon appears on the display when the auxiliary port is active.
l (bcl)
ockout