Squelch Level - Kenwood TK-7360 Instruction Manual

Vhf fm transceiver/ uhf fm transceiver
Hide thumbs Also See for TK-7360:
Table of Contents

Advertisement

2 Press
/
(if the key assignment list selection is configured as "Enabled") or
<B/C> to select your desired scrambler code.
3 Press S,
, or
• After changing your scrambler code, be sure to inform all of your group members of
the new code so they can also reset their transceivers. The scrambler function will
not work with transceivers set up with different scrambler codes.
m
/ S
onitor
Quelch
You can use the key programmed as Monitor or Squelch Off to listen to weak
signals that you cannot hear during normal operation and to adjust the volume
when no signals are present on your selected channel.
• The
icon appears on the display while Monitor or Squelch Off is activated.
Your dealer can program a key with one of four Monitor/Squelch Off functions:
• Monitor: Press to deactivate QT, DQT, DTMF, 5-tone, or FleetSync Signaling. Press
again to return to normal operation.
• Monitor Momentary: Press and hold to deactivate QT, DQT, DTMF, 5-tone or
FleetSync Signaling. Release to return to normal operation.
• Squelch Off: Press to hear background noise. Press again to return to normal
operation.
• Squelch Off Momentary: Press and hold to hear background noise. Release to return
to normal operation.
n Squelch Level
If a key has been programmed as Squelch Level, you can readjust your
transceiver's squelch level:
1 Press the key programmed as Squelch Level.
• The
icon appears on the display, along with the current squelch level.
2 Press
/
or <B/C> to select your desired squelch level from 0 to .
3 Press S or
k
l
ey
ock
Press the key programmed as Key Lock to lock the transceiver front panel and
microphone keys.
• When any key is pressed while Key Lock is active, "LOCKED" momentarily appears on
the display.
Press the Key Lock key again to unlock the keys.
S
S
ignAl
trength
The Signal Stength indicator shows the strength of received signals:
Strong
to store the new setting.
o
FF
(if the key assignment list selection is configured as "Enabled")
to store the new setting.
Sufficient
Weak
Very Weak
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tk-8360Tk-7360hTk-8360h

Table of Contents