Table of Contents
Advertisement
attach the breakout cable to the PCI card while the computer is on.
Doing so could damage the PCI card and void the warranty.
With your computer turned off, it is now time to connect the Delta 410 breakout
cable to the PCI host card that you have just installed. You may at this time also
want to connect to audio gear that you using in conjunction with your Delta 410.
Delta Driver Software Installation - for PC
The Delta 410 system includes a driver CD for Windows 2000/ME/98/95/NT
(and Macintosh, too), containing all Windows drivers and Delta Control Panel
software. To install these on your system, please follow these steps:
Windows 2000 Installation
1. After installing the Delta 410 hardware, boot your system and start
Windows. During the Windows boot procedure, new hardware will
be automatically detected by the Add New Hardware Wizard. Click
'Next>'.
2. The 'Add New Hardware Wizard' will now ask how you want to find
the driver. "Search for the best driver for your device" is already
selected. Click 'Next>'.
3. Windows will give you a selection of locations to search. Make sure that
only "Choose a Path" is checked, or click on the check box to do so.
Insert the Driver CD into your CD ROM drive. Type in the drive letter
of your CD drive (we will assume here that it is D:\) and the path to the
Delta drivers, which will be D:\Delta Series\Wdm. Click 'Next>'.
4. The 'Wizard' reports that its Windows driver file search has found the
M Audio Delta 410. Click Next>.
5. Windows is now ready to install the driver files from the specified
location. Click Next>. Windows will start to copy the files and show
you a progress report screen.
6. The Wizard reports that Windows has finished installing the software.
Click 'Finish'. Your Delta 410 is ready for action.
After completion of the driver installation, Windows may require you to restart
Windows. If it does request a restart, remove the Drivers CD Disk from the CD drive
and respond "Yes." The system will restart and your Delta 410 is ready for play.
Windows 98 Installation
1. After installing the Delta 410 hardware, boot your system and start
Windows. During the Windows boot procedure, new hardware will
be automatically detected by the Add New Hardware Wizard as
shown here. Click 'Next>'.
7
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
