Delta Driver Software Installation - For Mac - M-Audio Delta 410 Manual

'Yes'. Once the shortcut is installed, all you have to do is double-click on the
shortcut icon on your desktop to launch the Delta Control Panel software.
NOTE: When using a music software program that is ASIO capable,
launch the Delta Control Panel software from within that program.
Some of the control panel functions will be controlled from within
that program, such as master clock setting and sample rate, so it
is desirable to launch the music program first, and then the Delta
Control Panel from the the program's "launch" or "control panel"
button. Without the music program open however, it is okay to
open the Delta panel from your desktop or other location.

Delta Driver Software Installation - for Mac

1. Open the System folder on your Macintosh hard drive. In the System
folder, locate the Extensions folder.
2. On you Drivers CD disk, open the Mac Delta Drivers folder. Place the
extension file "Delta 410 Driver" in your Extensions folder by clicking
on it and dragging it to the Extensions folder.
3. If you are using a music program that uses ASIO drivers, it will also
have an ASIO folder within the application's folder. In your Mac Delta
Drivers folder you will find three Delta 410 ASIO drivers. For Cubase
versions 4.x, use the "ASIO2 Delta410" driver. For Metro, or earlier
versions of Cubase, use the "ASIO Delta410v3" driver. For any music
program that is not ASIO2 capable, use the "ASIO Delta 410" driver
instead (check your program's documentation). Place the file "ASIO
Delta" in your program's ASIO folder by clicking on it and dragging it
to the ASIO folder.
3. Drag the "DeltaPanel PPC" file onto your Macintosh hard drive. You
can run the Delta Control Panel from any place that's convenient,
though music software applications that use ASIO will allow you to
launch the Delta panel from within the program. If not, we suggest
creating an alias to the control panel by highlighting it and pressing
Command (Apple key)+M. Then, drag the alias to the desktop.
4. With the Delta 410 PCI card installed, restarting the computer will
load the Delta 410 extension. You will be able to visually see the Delta
extension icon pass by as your system loads extension.
5. Go to the Apple menu |Control Panel | Sound. You should see the
"built-in" sound icon, plus the Delta icon if your Delta 410 is properly
installed. If your music program does use ASIO, you may want to
leave the Sound Manager driver set to "built-in" for both Sound In and
Sound Out. If your program does not use ASIO (check your software's
documentation) and you will be using the Sound Manager to
communicate with your Delta 410, set Sound In and Sound Out to
"Delta." See the section "Hardware Settings Page" in the Delta 410
11