•
Do not submerge the units in water. Place units in locations
that are adequately protected against moisture and rain.
•
Immediately remove all low powered batteries to avoid
leakage and damage. Replace only with new batteries of the
recommended type (alkaline).
•
Do not make any repair attempts to the unit. Return them to
their original point of purchase for repair by a qualified
engineer. Opening and tampering with the unit may invalidate
their guarantee.
•
Do not expose the units to extreme and sudden temperature
changes, this may lead to rapid changes in forecasts and
readings and thereby reduce their accuracy.
SPECIFICATIONS:
Temperature measuring range
Indoor
Outdoor
Indoor Humidity measurement
Indoor Temperature checking interval
Outdoor data checking interval
Power Supply
Temperature Station
Temperature Sensor
Battery life cycle (Alkaline batteries recommended):
:
14.1°F to +139.8ºF with 0.2ºF resolution
(-9.9ºC to +59.9ºC with 0.1ºC resolution)
("OF.L" displayed if outside this range)
:
-39.8ºF to +139.8ºF with 0.2ºF resolution
(-39.9ºC to +59.9ºC with 0.1ºC resolution)
("OF.L" displayed if outside this range)
:
2 x AA, IEC LR6, 1.5V
:
1 x CR2032, 3.0V
14
:
1 to 99% (Displays "1%"
when ≤ 1%; displays
"99%" when ≥ 99%)
:
every 15 seconds
:
every 16 seconds