Battery Change - La Crosse Technology WS-9611U Instruction Manual

Note: In the event of changing batteries in any of the units, all units need to be reset by
following the set-up procedures. This is due to a random security code assigned by the
wireless temperature sensor at start-up. This code must be received and stored by the
wireless weather station in the first 3 minutes of power being supplied to the wireless
temperature sensor.
TO INSTALL AND REPLACE BATTERIES IN THE WIRELESS WEATHER
STATION
The wireless weather station uses 2 "AA" Alkaline Batteries. To install and replace the

BATTERY CHANGE:

It is recommended to replace the batteries in all units on an annual basis to ensure
optimum accuracy of these units.
batteries, please follow the steps below:
1. Push down on the top center of the
battery cover and pull away from the
unit to remove the cover.
2. Insert batteries observing the correct
polarity (see marking).
3. Replace compartment cover.
46