Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for La Crosse Technology WS-9018U
Summary of Contents for La Crosse Technology WS-9018U
- Page 1 WS-9018U Wireless Weather Station Instruction Manual...
-
Page 2: Table Of Contents
Contents Functions of the Weather Station..3 Safety notes...3 Product features..4 Getting started..4 Quick Set Up...5 Setting up Activating the Sensor(s)..6 Activating the Receiver...6 How to use the Weather Station... 6-8 User setting mode..8-10 Placing and mounting the units..10 10. -
Page 3: Functions Of The Weather Station
Thank you for purchasing this weather station. This unique product is designed for everyday use for the home or office and will prove to be an asset of great use. To fully benefit from all the features and understand the correct operation of this product, please read this instruction manual thoroughly. -
Page 4: Product Features
3. Product Features: • 8 LCD contrast level settings (default setting level 4) • WWVB radio controlled time reception • Time format is user selectable to 12 or 24 hour display (default setting 12 hour) • Time zone setting ±12 hours (default setting time zone EST -5) •... -
Page 5: Quick Set Up
About WWVB (Radio Controlled Time) The NIST (National Institute of Standards and Technology—Time and Frequency Division) WWVB radio station is located in Ft. Collins, Colorado and transmits the exact time signal continuously throughout the United States at 60 kHz. The signal can be received up to 2, 000 miles away through the internal antenna in the weather station. -
Page 6: Setting Up
6. Setting up: Activating the Sensor(s): 1. Using a screwdriver, unscrew and open the battery cover located at the front of the sensor. 2. Insert 2 x AA 1.5V batteries into the battery compartment being sure to observe the correct polarity marked inside the battery compartment. - Page 7 1. The ‘TEMP/HYGRO OUT’ section will display the outdoor temperature and outdoor humidity of any one of up three thermo-hygro sensors. Use the channel key to toggle between sensors 1, 2 and 3 (sensors are optional from your dealer). 2. MIN/MAX function, with each press of the min/max key the LCD will toggle through: •...
-
Page 8: User Setting Mode
increase in air pressure. If the bars go down, it means the air pressure has dropped and the weather is expected to become worse. 10. The snowfall indicator is represented by the cloud and snowflake icon (positioned over the raining icon) when the temperature of sensor 1 falls to 32°F (0°C) or below. - Page 9 Time zone ±12 hours The default setting is 0 hours. In the time zone mode, use the ‘+’ or ‘–‘ keys set the desired time zone for your region from the WWVB radio controlled time then press the set key once to enter the manual time adjusting mode. Time adjustment: hour To adjust the hour (hour digit is flashing), use the ‘+’...
-
Page 10: Placing And Mounting The Units
Weather history interval recording setting The default weather history interval recording is 1 hour. To adjust the interval setting (interval digit is flashing), using the ‘+’ or ‘–‘ keys select the interval time for data recording from 5 sec, 10 sec, 30 sec, 1 hr, 3 hrs, 6 hrs, 12 hrs, 24 hrs. Once the interval is set, press set key once more to return to the normal operation mode. -
Page 11: Synchronizing The Receiver To The Sensor Signal
• Do not immerse any of the units in water • If you have damaged this product, do not attempt to make any repairs. Please take this unit to a qualified technician or call La Crosse Technology Technical Support for assistance. 14. Problems & Solutions:... -
Page 12: Specifications
Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center. -
Page 13: Warranty Information
This warranty gives you specific legal rights. You may also have other rights specific to your State. Some States do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you. For warranty work, technical support, or information contact: La Crosse Technology 2809 Losey Blvd. S. La Crosse, WI 54601 Phone: 608.782.1610...