Sans Digital ACCUNAS AN2L Quick Installation Manual

Cover
ACCUNAS
QUICK INSTALLATION GUIDE ON GUIDE v1.0 v1.0
Hardware Connection
Printer MS1UT Network Switch Rear Panel
USB
LAN
RESET
K DC12V
System Default Settings:
Network Setting: DHCP Username: admin
System Configuration
1) Insert the AN2L CD-ROM. 2) After the installation, SD Finder will run
- For MAC users install MacWizard.dmg, and automatically.
then run Quick Install Wizard. Note: If using Windows XP SP2, please
- For PC users, install SD Finder to continue. click "unblock" to continue.
AN2L
Quick Installation Guide
Install AN2L Finder
Install NetBak Replicator
Install QGet
User Manual and Application Notes
Browse CD
Product Support and Registration Website
Back Exit
Page 3
Package Contents
AN2L
Included
AN2L ................................................................................................
Power Adapter ...............................................................................
CD / Manual ...................................................................................
Screws .......................................................................................
Ethernet Cable ...............................................................................
(Please contact us in case of missing or damaged items)
Hardware Diagrams
COPY BUTTON
USB 2.0 PORT
LED INDICATORS:
USB, STATUS, HDD1,
HDD2, NETWORK,
POWER
POWER BUTTON
System Configuration (Continued)
3) SD Finder will auto detect the AN2L on the
PC / MAC
network. Click "Yes" to continue.
Giga LAN
Computer Rear Panel
5) The AN2L unit will restart after the installation
is complete.
Password: admin
AN2L
7) Windows only: AN2L provides several default
folders for sharing and access. Please select
the share folder you would like to map on
your computer.
Page 1
STATUS
HDD1
HDD2
LAN
POWER
1
1
1
ACCUNAS AN2L
1 SET
QUICK INSTALLATION GUIDE IDE v1.0 v1.0
1
COOLING FAN
STATUS
HDD1
USB 2.0 PORT
HDD2
USB
LAN
ETHERNET
POWER
LAN
RESET
POWER SUPPLY
K DC12V
4) Type in the administration password.
Follow the on-screen instructions to
complete the configuration. Please wait
until all changes are applied.
Note: RAID configuration may take more
than 20 minutes depending on the size of
the hard drives.
6) Click Finish to finalize the setup.
AN2L
8) You could now connect to the
administration page to setup the user,
share folders and other network settings.
Page 4
Page 2
Installing Hard Drives
Step 1 Step 2
Unscrew the screws on the back panel, and Install the first hard drive by placing it in the
open the unit by sliding the larger side panel hard drive cradle, and sliding it forward to lock
forward. it into the connector.
Step 3 Step 4
Install the second hard drive by placing it on Connect the data cable and SATA power
top of the first hard drive, and securing the cable as shown in the diagram below, and
screws on the sides of both hard drives. slide the case back in place and tighten the
screws on the back panel.
POWER CABLE
Other Sans Digital Products
• 3.5" Hard Drive Enclosure with Removable Tray
• Dual host interface: USB 2.0 and eSATA.
• Supports High Performance SATA hard drives.
• Ultra quiet operation.
• Vertical placement stand included.
• Durable aluminum housing.
MS1UT
• Supports both Windows and Mac OS X.
• 2-Bay External RAID Enclosure
• Supports JBOD mode.
• USB 2.0 (MS2U+) and eSATA (MS2T+) interface.
• Drive Interface: 3.5" x 2 SATA I/ SATA II hard drives.
• Hot-swappable removable tray.
• Supports the lastest 1TB hard drive.
MS2U+/MS2T+
• Hard disk, fan and temperature failure detectors.
• 2-Bay External RAID Enclosure
• Hardware RAID design, supporting RAID 0, 1, JBOD, BID, SAFE33, and
SAFE55, with eSATA and USB 2.0 interfaces.
• Drive Interface: 3.5" x 2 SATA I/ SATA II hard drives.
• Hot-swappable removable tray.
• Data auto-rebuilding.
MS2 MS2UT+/MS2UTN+ S2 S2 2 UT+/MS UT+ /MS2UT 2UTN T N + N
• Hard drive, fan and temperature failure detectors.
• 4-Bay External RAID Enclosure
• Support JBOD for independent access up to four hard drives.
• 1394b x 2 (MS4B), eSATA x 4 (MS4T), USB 2.0 & Port Multiplier (MS4UM).
• Drive interface: 4 x 3.5" SATA I/ SATA II hard drives.
• RAID supported in MS4B (RAID 0) and MS4UM (software RAID 0, 1,
0+1, 5, 5 + spare in Windows).
MS4B/MS4T/MS4UM
• OS independent with plug and play capability.
T: 1.800.980.1988 E: INFO@SANSDIGITAL.COM
Page 5
DATA CABLE
W: WWW.SANSDIGITAL.COM