United States laws and regulations, including without limitation those of the U.S. Department of for a breach of warranty shall be, at SANS DIGITAL’s option and in its sole discretion, replacement or repair of the Commerce, and, as applicable, the laws and regulations of other jurisdictions.
HD Tray Keys ............................. 2 Removable Tray Modules (Screws Included) ..................2 NOTE: Please contact Sans Digital in case of missing or damaged items. STEP #2 Wait for initialization to finish Go to “Storage Manage” - > Create RAID array...
INTEGRATION AND SETUP To setup the TCP/IP, type ‘3’ and press ‘enter’. DEFAULT SETTINGS: LAN Port#1 IP address: DHCP Administrator Username: root Password: 0000 (4 zeros) INITIAL SETUP – Assigning IP to the Unit Enter ‘1’ to select Client #1: AN104LS or ‘0’ to cancel. Once selected, enter the Connect the NAS unit to your network (connect the RJ45 network cable to the LAN default password for the NAS unit: 0000 (4 zeros).
CONSOLE LOGIN – Assigning IP to the NAS from the Console VOLUME MANAGEMENT If the NAS unit could not be detected via the NAS-Finder Utility, console login could be used for detection by conneting a keyboard and monitor to the NAS unit. Power on the NAS unit and a DOS dialog box will prompt the user to enter a username and a password.
Page 7
Step-5: Select “Storage Manager” - > “Logical Volume Manager” Step-3: Select “Network Setting” Network Setting allows the user to perform the following setups: LV is the actual share used via Microsoft Network, AFP or NFS. The name assigned will be Assign IP to NIC ports, and configure NIC ports Bonding (teaming) Mode.
Page 8
Step-7: Select “User & Access” - > “Access Control – Microsoft” Choose a Volume (Network Share). By default, all users with account on the AN104LS are given full access to the volume. Assigning a specified user to the “Assigned User List” will deny the access right of all users who are not on the “Assigned User List”.
Need help?
Do you have a question about the ACCUNAS AN104LS and is the answer not in the manual?
Questions and answers