Reset The Radio; Auxiliary Input Socket - Sangean RCR-3 User Manual

RESET the radio

If your radio fails to operate correctly or some digits on the display
are missing or incomplete, please carry out the following procedure.
. Switch off the radio.
2. With the aid of a suitable implement (e.g. paper clip), press the
RESET button located in the bottom of your radio for at least 2
seconds. This will reset the microprocessor clock time and clear
all stations stored in the preset memory.

Auxiliary input socket

A 3.5mm stereo Auxiliary Input socket is provided on the rear of
your radio to permit an audio signal to be fed into the unit from an
external audio device such as iPod, MP3 or CD player.
1. Repeatedly press and release the Band button until AUX IN is
shown.
2. Connect an external audio source (for example, iPod, MP3 or
CD player) to the Auxiliary Input socket.
3. Adjust the volume setting on your iPod, MP3 or CD player to
ensure an adequate signal level from the player, and then rotate
the Volume control on the radio as needed for comfortable listening.
22