Alarm Operation - Sangean RCR-3 User Manual

Alarm operation

There are four alarms which can each be set to wake you to AM/
FM radio or buzzer alarm. The alarms may be set while the unit
is in standby mode or while playing. When the alarm light is on, it
means the indicated alarm will active in 24 hours. Ensure that the
time is set correctly before setting the alarms.
. Before setting an alarm ensure the clock time is set. Press and
hold any of the Alarm button to enter the alarm setting (e.g. Alarm 1
button to enter the alarm  setting).
2. The hour setting of alarm 1, for example, will begin to flash. Press
the TUNING up/down button to select the required alarm hour,
and press the BAND/SELECT button to confirm the setting.
Press the TUNING up/down button to select the required alarm
minute, and press the BAND/SELECT button to confirm the setting.
3. Then the display will show the frequency options for the alarm.
Press the TUNING up/down button to select the desired option
and press the BAND/SELECT button to confirm the setting.
The alarm options are as follows:
ONCE – the alarm will sound once
DAILY – the alarm will sound everyday
WEEKDAY – the alarm will sound only on weekdays
WEEKEND – the alarm will sound only at weekends
6