Controlling The Rhythmtrak; 234 With The Fs01 - Zoom RhythmTrak 234 Operation Manual

Controlling the RhythmTrak

When the separately available foot switch FS01 is connected to the [CTRL1 IN] or [CTRL2 IN] jack on
the rear panel, it can be used to operate the bass drum or switch between open and closed hi-hat sound.
The switch can also be used in place of the [START] key and [STOP] key to control operation of the
RhythmTrak 234 with your foot.
•••
SOUND
JAMMER
SOUND CHANGE
VOLUME
PITCH
1
Connect the FS01 to the [CTRL1 IN] or [CTRL2 IN] jack on the rear panel.
STEP
For information on connections, see page 3.
2
Use the [FUNCTION] key and pad 9 (CTRL ASSIGN) to set the FS01 function.
STEP
For information on the setting procedure, see page 45.
3
Use the FS01 in pattern mode or play mode.
STEP
Depending on the function selected in step 2, the FS01 activates
the sound of a specific pad, switches between the sound of two
pads, or controls playback start/stop of a song or pattern. For
details, see page 46.

234 with the FS01

•••
STEP/MEASURE
MEASURE BEAT
DRUM A DRUM B DRUM C BASS
VALUE
+
SOLO
–
MUTE
OPEN HAT
7 CLICK VOL
REPEAT/STEP
SONG/PATTERN
Groove PLAY
MODE
SONG PATTERN
+
TAP STEP PAUSE STOP
–
TEMPO II EXIT
REAL-TIME REC
INSERT DELETE
/COPY /ERASE
2
2
49