Zoom RhythmTrak 234 Operation Manual page 38

Use the [UP/DOWN] keys to select the user pattern number to be assigned to the
4
STEP
first step.
During song recording, the [UP/DOWN] keys select the user pattern
to be assigned to the step. (Preset patterns cannot be selected.)
The selected pattern number is shown on the [SONG/PATTERN]
display.
When wishing to hear the currently selected pattern, you can use
HINT HINT
the [START] and [STOP] keys to play it. While a pattern is
playing, you can also switch the step number back and forth to
check the patterns in other steps.
5
To proceed to the next step, press the [+] key of the [VALUE UP/DOWN] keys.
STEP
The [VALUE] display shows the second step, and the
[SONG/PATTERN] display shows "EE" which indicates the end of
the song. In this condition, you can select the pattern for the
second step.
Pressing the [STEP] key while recording a song will take you to the
next step of the song, in the same way as when you press the
[VALUE UP] key.
6
Repeat steps 4 - 5 to create the entire song.
STEP
One song can have up to 255 steps (patterns). To change a pattern
HINT HINT
selection, you can use the [-] key of the [VALUE UP/DOWN] keys to
return to the previous step.
To insert a pattern before the currently selected step, press the [INSERT/COPY]
7
STEP
key and perform step 4.
A new step is inserted before the currently selected step, and
subsequent steps are shifted one count up.
8
To delete the currently selected step, press the [DELETE/ERASE] key.
STEP
The currently selected step is deleted, and subsequent steps are
shifted one count down.
Pattern E
Insert
Pattern A Pattern B Pattern C
Pattern A Pattern B Pattern E
Delete
Pattern A Pattern B Pattern C
Pattern A Pattern B Pattern D
[UP/DOWN ]
STEP/MEASURE
MEASURE BEAT
0 0 0 05
VALUE
[VALUE UP/DOWN ]
STEP/MEASURE
MEASURE BEAT
0 0 1
VALUE
[INSERT/COPY]
Pattern D
Pattern C Pattern D
[DELETE/ERASE]
Pattern D
+
SONG/PATTERN
+
SONG/PATTERN
35