Pattern Copy - Zoom RhythmTrak 234 Operation Manual

The current pattern (preset pattern or user pattern) can be copied to another user pattern. This is useful for
example when wishing to change only a part of pattern, such as adding percussion or changing only the
bass track phrasing. The copy source can be either a preset pattern or a user pattern, but because preset
patterns are read-only, the copy destination can only be a user pattern.
SOUND
JAMMER
DRUM A DRUM B
SOUND CHANGE
VOLUME
PITCH
1
In pattern mode, select the pattern to be used as the copy source.
STEP
2
Press the [INSERT/COPY] key.
STEP
The [INSERT/COPY] key LED flashes and the current pattern is
selected as the copy source.
Use the [UP/DOWN] keys or the [SOUND JAMMER] slider to select a user pattern
3
STEP
(01 - 99) as the copy target.
When the copy is executed, the existing contents of the user pattern
NOTE
selected as the copy target will be erased. Make sure that the
pattern you have selected is one that you don't mind erasing.
To execute the copy process, press the [INSERT/COPY] key. When wishing to
4
STEP
cancel the process, press the [STOP] key.
When copying is completed, the unit returns to the pattern mode
with the copy target pattern being selected.
If copying was canceled, the unit returns to the pattern mode with
the copy source pattern being selected.
32

Pattern Copy

STEP/MEASURE SONG/PATTERN
MEASURE BEAT
DRUM C BASS
VALUE
+ +
SOLO
– –
MUTE
OPEN HAT
7 CLICK VOL
REPEAT/STEP
Groove PLAY
MODE
SONG PATTERN
TAP STEP PAUSE STOP
TEMPO II EXIT
REAL-TIME REC
INSERT DELETE
/COPY /ERASE
STEP/MEASURE
MEASURE BEAT
0 0 0 01
VALUE
STEP/MEASURE
MEASURE
0 0 0 02
VALUE
3
4
2, 4
SONG/PATTERN
Copy source
pattern number
SONG/PATTERN
BEAT
Copy target
pattern number