Zoom RhythmTrak 234 Operation Manual page 49

the same way as the [SOUND JAMMER] slider to continuously adjust pitch, volume, or tone (see
page 13). The selected function is shown on the [VALUE] display as "Pit", "Vol", or "SndC".
It is not possible to set the [SOUND JAMMER] control and the pedal connected to [CTRL1 IN] or
[CTRL2 IN] to a different function.
When FS01 is connected
Press any one of pads 1 – 13, the [START] key, [STOP] key, [REPEAT] key, [TEMPO] key,
[VALUE UP] key, or [VALUE DOWN] key while pushing down the FS01 to assign the function to
the FS01.
• When one pad is pressed
The FS01 operates like that pad, activating the sound assigned to the pad. This can be used for example to
play the bass drum manually during a performance.
• When two pads are pressed in sequence
The FS01 can be used to switch the sound of the pad selected first. When the FS01 is depressed, the
sound of this pad is heard, and when the FS01 is not depressed, the sound of the other pad is played. (This
can be used for example to switch between open hi-hat and closed hi-hat during a performance.)
Operating the FS01 will activate the sound of the first pad, even if that pad is not pressed.
• When the [START] key is pressed
Pressing the FS01 will pause or resume playback.
• When the [STOP] key is pressed
Pressing the FS01 will stop playback or start playback from the top of the pattern or song.
When the FP01 or FS01 is not connected or when it is not pressed
NOTE
at the time when the [FUNCTION] key is operated, the above
procedure has no effect.
Setting the playback swing amount (SWING)
Setting Range: 50 - 75
This setting controls the swing amount (rhythm flourish). Higher values result in more pronounced
swing. This item influences only the playback timing of the pattern. It does not affect the recorded data of
the pattern.
Setting the pad sensitivity (PAD SENS)
Setting Range: Soft, MEd, Loud, LItE, norM, HArd, Ehrd
The [VALUE UP/DOWN] keys are used to set the pad sensitivity.
The following 7 settings are available.
• Soft (Fixed Soft): Gives a soft sound regardless of the tapping intensity.
• MEd (Fixed Medium): Gives a medium sound regardless of the tapping intensity.
• Loud (Fixed Loud): Gives a loud sound regardless of the tapping intensity.
• LItE (Light): This setting gives the highest sensitivity.
• norM (Normal): This setting gives medium sensitivity.
• HArd (Hard): This setting gives low sensitivity.
• Ehrd (Extra Hard): This setting gives the lowest sensitivity. To achieve a loud sound, the pads
must be hit very hard.
46
(Default value: 50)
(Default value: norM)