Changing The Kit/Program Of A Track - Zoom RhythmTrak 234 Operation Manual

Changing the kit/program of a track

The patterns of the RhythmTrak
tracks contain a drum kit each, and the bass track contains a bass program. The steps below can be used
to change the kit or program assigned to a track.
SOUND
JAMMER
2
1, 2
Use the [KIT/TRACK SELECT] keys to select the track whose drum kit/bass
1
STEP
program you want to change, and hold the key down.
In pattern mode, the [KIT/TRACK SELECT] keys serve to select a
track. While one of the keys is pressed, the number of the
kit/program allocated to the corresponding track is shown on the
[VALUE] display.
While holding the [KIT/TRACK SELECT] key down, use the [VALUE UP/DOWN] keys
2
STEP
or the [SOUND JAMMER] slider to change the kit.
The track is switched to the sounds of the new kit.
3
By repeating steps 1 and 2, you can change the kits assigned to the other tracks.
STEP
HINT
HINT
Changing the kit/program is also possible while playing a pattern.
• When the kit/program is changed in a user pattern, the new
NOTE
kit/program setting will be stored when the pattern is stored.
• The kit/program of a preset pattern cannot be changed.
16
234 are made up of drum track A - C and the bass track. The drum
•••
STEP/MEASURE
MEASURE BEAT
DRUM A DRUM B DRUM C BASS
VALUE
+
SOLO
–
MUTE
SOUND CHANGE
VOLUME
PITCH
OPEN HAT
7 CLICK VOL
REPEAT/STEP
SONG/PATTERN
Groove PLAY
MODE
SONG PATTERN
+
TAP STEP PAUSE STOP
–
TEMPO II EXIT
REAL-TIME REC
INSERT DELETE
/COPY /ERASE
STEP/MEASURE
MEASURE
[DRUM A]
STEP/MEASURE
MEASURE
2
[DRUM A]
SONG/PATTERN
BEAT
1 01
VALUE
Kit number
[VALUE UP/DOWN]
+
SONG/PATTERN
BEAT
2 01
VALUE