The unit will not turn ON
to the INPUT jack to start the unit.
No sound or very low volume
Adjust the levels of the effects being used
(→P10).
There is a lot of noise
→P8).
→P22).
→P8).
An effect is not working
"DSP Full!" appears on the effect graphic. In
this case, the effect is bypassed (→P11).
Batteries lose their charge quickly
batteries. The continuous operation time is
about 7 hours with mono input and about 5
hours with stereo input when using alkaline
batteries.
Set the type of battery being used to enable
the remaining charge to be shown more
accurately (→P23).
they might be used more quickly in cold.
Troubleshooting
→P8).
35
NEXT