Salus RT500RF Instruction Manual page 18

Salus RT500RF Manual:89
Press the UP or DOWN key to select the programme set for either Weekday
or Weekend to be reviewed or adjusted. Pressing the SET key at any time
when in programming mode will return the RT500RF into Normal mode.
Press the SELECT key to confirm the Weekday or Weekend selection. Once
this is set, the 'Hour' will flash to indicate that it is the selected item and is
the next item to be adjusted:
Programme
1 Hour
2 Hour
3 Hour
4 Hour
5 Hour
...before then allowing you to cycle back to Programme 1. Pressing the SET
key at any time will confirm the setting and return to the programme set
selection.
18
Press the UP or DOWN key to adjust the
hour setting to the desired value, and
confirm your selection by pressing the
SELECT key.
Pressing the SELECT key allows you to
step through each of the items to be
reviewed or adjusted within the
programmes in the following sequence:
Function Sequence
Minutes
Minutes
Minutes
Minutes
Minutes
RT500RF INSTRUCTION MANUAL
9/7/10 10:10
Set point temperature
Set point temperature
Set point temperature
Set point temperature
Set point temperature
Page 18