Table of Contents
Advertisement
Note Before Connect an Audio System
= When connected to an HDMI compatible television with HDMI cable, please set the television Audio to "Off", (Other-
wise, the sound is output from the television.)
= Please turn the volume down when you turn on the Amplifi er. Sudden loud sound may cause damage to the speakers
and your ears.
g
Connecting to an Audio System (2 Channel Amplifi er / receiver)
1. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the Blu-ray disc player to the
AUDIO (red and white) IN terminals of your Amplifi er.
Back of the unit
g
Connecting to an Audio System (HDMI compatible Amplifi er / receiver)
When connected to a compatible amplifi er / receiver, you can enjoy surround sound recorded with Dolby Digital Plus,
Dolby TrueHD or DTS-HD.
1. Using the HDMI-HDMI cable (not included), connect the HDMI OUT terminal on the rear of the Blu-ray disc player to
the HDMI IN terminal of your Amplifi er.
2. Using the HDMI-HDMI cable connect the HDMI OUT terminal of the Amplifi er to the HDMI IN terminal of your TV.
Back of the unit
Note
= The position of terminals may vary depending on the Amplifi er. Please refer to the userʼs manual of your Amplifi er.
= Please set the video and audio settings in the Home menu according to the Amplifi er, please refer to page 22~23.
= Depending on how the disc was recorded, the audio may not be output properly on the number of channels desired.
12
2ch Amplifier/receiver
AUDIO IN
R
L
Audio/Video cable
(included)
HDMI compatible
amplifier/receiver
HDMI IN
HDMI
compatible
television
HDMI OUT
HDMI
HDMI IN
Advertisement
Table of Contents
