Related Manuals for Kogan KABRP3D4KUA
Summary of Contents for Kogan KABRP3D4KUA
- Page 2 Safety Notices......................................2 Notice........................................2 Placement......................................2 Power Supply.....................................2 Adjusting Volume.....................................2 Cleaning........................................2 Cleaning discs.....................................2 Connecting to the HDMI OUT port............................2 Using the Remote Control & Battery...............................3 Notes for remote control operation............................3 Using Discs........................................4 Product Description....................................5 Front panel......................................5 Rear panel......................................5 Remote Control....................................6 Device Connections....................................7 Video and component input.................................7 Connecting 7.1 channel analog input amplifier........................7 Coaxial and Optical connection ..............................7...
- Page 3 Please unplug by holding the plug. Never pull on the cable. • If the power cable is damaged, do not use the player. Contact the Kogan customer support team. • When you listen to any material with low input levels or no audio signals, do not turn the volume up, as you may hurt your ears or damage the speakers when the volume returns to peak level.
- Page 4 Do not disassemble the remote control. If there is a problem with the remote, please contact the • Kogan customer service team. If the remote control isn't effective or the usage range decreases significantly, please replace the •...
- Page 5 Do not touch the data/playing side of the disc. Do not stick paper or adhesive tape to the playing side of the disc. Data side Fingerprints and dirt on the disc surface may affect the audio and video quality. Use a soft cloth to wipe the disc from the centre out to the outside.
- Page 6 1. Disc tray Play/Pause 2. Remote receiver 7. Prev 3. Next 8. Power (ON/OFF/Standby) Turn player on/off, or put into standby. 4. LED 5. Eject/Insert USB port 1. Rear left surround channel output 8. Right front channel output 2. Left front channel output 9.
- Page 7 While playing, press the following buttons to operate. : turn player on/off. : select and enter numbers. : select audio language or channel. : access the main menu of the disc. : access main menu of disc. Information of the video. : return to previous menu.
- Page 9 Connect the network cable then configure the network in the setup menu (refer to page XX). The network functionality will now be available.
- Page 10 The corresponding functions of the 4 icons on the main menu. Picture 1 With the screen control menu, you can set and select certain playing statuses. While playing, press the [Option] key to show the screen control menu, as shown below. In the screen control menu, press to select an item, then press [OK] to select and set.
- Page 11 then press [ ] to enable/disable the output of secondary audio. Bitrate [BD-V DVD-V CD VIDEO AUDIO]: display the bit rate of the video/audio signal. Instant search [BD-V DVD-V CD VIDEO AUDIO]: go forward 30 seconds and play. Instant replay [BD-V DVD-V CD VIDEO AUDIO]: go back 10 seconds and play. Lantern slide [PHOTO]: display the switching speed when playing a photo slideshow.
- Page 12 When viewing photo files, the menu is shown as below: : display the current file and total files in the current folder : displays the current repeat mode : effect and switching speed Note: in the OSD menu, press the [INFO] key to hide the menu. For discs that support BD-Live, access the internet with the player to download any additional trailers, special features and interactive games.
- Page 13 Press the direction keys to select the media that is storing the files that you wish to play and press [OK] to confirm the media selection, as shown below. Press the direction keys to select the type of data file to be played (eg. Picture, music or movie), then press OK, to select the file directory of the selected type, as shown overleaf.
- Page 14 files in the play list. In the play list, press [Popup Menu] to display a dialog box, which you can select accordingly from the options below, then press [OK]. Clear from play list: clears the selected file from the play list; •...
- Page 15 After getting into the Network Neighbourhood from the home page, DLNA devices found by the player will display (see image below). You can then browse and play the pictures, videos or music on the devices. → → → → Turn on DLNA, Home Page General Settings System Turn on (see image below).
- Page 16 (Prevent screen Enable screen saver. If there is no operation within 15 minutes, burn) the screen saver will be activated automatically. Unit will enter standby mode. Disable this function. Enable auto-play. When a disc is inserted, the player will read and start to play automatically.
- Page 17 Enable PIP function The PIP function of certain BD discs allows the player to display primary and secondary screens simultaneously. Generally, the primary video displayed in full screen while the secondary video is displayed in a smaller frame. When PIP is enabled and the player recognises that the disc contains secondary video, it will display an icon.
- Page 18 Select this function and press [OK]. The screen will show the dialog box below and ask you to enter your password. See the (Allow select previous page for how to set your password. playing according to disc rating and filtering methods for children) Press [0-9] to enter your current password.
- Page 19 Select the mode of network access. (select this option if the network is connected via a cable). (Select this option if the network is connected through a wireless NIC; in this case, the USB interface in the rear side of the player must be inserted with a wireless NIC with RT7601 x chip) To change the network access mode, please disconnect the...
- Page 20 Set the access authority of BD-Live content. (allow all BD-Live discs to connect to network) (only registered BD-Live discs are allowed to connect to network) (forbid all BD-Live discs from connecting to network). Enable PC browsing function, and play video, music and pictures in PC.
- Page 21 Set the system of the output TV signal. Set the colour space Set HDMI colour depth Enable/disable the output of HDMI 1080P 24HZ. Enable/disable the output of the 3D signal The player checks and selects whether HDMI signal output signal is of a 3D blu-ray disc Press direction keys to adjust the brightness, contrast, tune and saturation.
- Page 22 (select the If the input audio is higher than 48KHZ, the original audio will be down sampling downsampled to 48KHZ, or lower. If the audio device supports frequency of audio input higher than 48KHZ, then this option is not digital audio recommended.
- Page 23 Confirm after upgrading. → → First enter into SETUP menu, then select Universal Setting Network Internet. Set Internet to ON. Navigate through the menu to Ethernet. IP Setting: users can choose manual settings or automatic settings. After setting, please select Connect to Test; if successful, will show that the internet connection is If the connection fails, please unplug the network cable, turn off the player, reinsert the cable and then start the player again.
- Page 24 If there is any product failure, please check the list below. If you are not sure of the instructions given or the issue cannot be solved, please contact the Kogan customer service team. It is prohibited for customers to perform repairs on the unit themselves. Doing so will void your warranty.
- Page 25 mode to receive the input. → → Video output resolution is Please reset the resolution in Main Menu Display TV and set to too low. the video output signal format of the applicable terminal. Aspect ratio cannot be The aspect ratio of certain BD/DVD discs is fixed. Please refer to changed.
- Page 26 Note: Specifications are subject to change without notice. The player supports the following area codes. Australia BD-Video DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R/-R DL (Double layer) VCD/SVCD Audio CD, CD-R-/CD-RW, MP3, JPEG USB Devices Signal system: PAL/NTSC Composite video output: 1 Vp-p (75) HDMI output: 480p, 576p, 720p, 1080i, 1080p, 1080p24, 4K*2K 7.1 channel analog output Front left/right channel: 2Vrms (>1000)