Table of Contents
Advertisement
Menu
Setting
column
Audio
Output
Audio
Setting
Speaker
Setting
22
Sub-Menu
Spdif
HDMI
Down_samp
DRC
Confi guration
Test Tone
Settings and Explanation
Sets the output mode of COAXIAL and OPTICAL terminals.
= Bitstream
Outputs digital signal without any processing. Secondary Audio is
not output.
= PCM
Outputs 2-channel PCM signal.
= Reencode
Outputs Bitstream with Secondary Audio.
= Off
Shut off output.
Sets the output mode of HDMI terminal.
= Bitstream
= PCM
= Reencode
= Off
Selects the down-sample frequency of the digital audio signal.
This function is effective for the audio signal output from the CO-
AXIAL and OPTICAL terminals.
= 48K
= 96K
= 192K
Sets the DRC (Dynamic Range Compression) mode. This function
is useful when you watch movies in the night.
DRC makes loud sounds such as explosions quieter, and
conversations more audible.
= On
= Off
= Auto
Sets the Downmix method to analog 2-ch from Lt/Rt or Stereo.
Then sets the speakersʼ
Size (if the speakersʼ Cross-section area ≥16cm² select big,
otherwise select small);
Trim (adjusts the output intension from -10~10 dB);
Delay (sets the distance between listener and speaker from
0~1000cm).
= 2.x
Lt/Rt:
Select this item if the unit is connected to a Dolby Pro Logic
decoder. Sound from rear speakers is mixed to the 2-ch stereo sound.
Stereo:
Changes channel output to stereo, which only delivers
sound from the two front speakers.
Sets the selected speakerʼs Size, Trim and Delay.
= More
Advertisement
Table of Contents
