Connecting To A Tv (Component); Connecting To A Tv (Video) - Kogan KABRP21X3DB User Manual

g

Connecting to a TV (Component)

Connecting to your TV using Component video cables.
- You will enjoy high quality and accurate color
reproduction images. Component video separates the
picture element into black and white (Y), blue(PB), red
(PR) signals to present clear and clean images. (Audio
signals are delivered through the audio output.)
1. Using component video cables (not included),
connect the COMPONENT VIDEO OUT terminals on the
rear of the Blu-ray disc player to the COMPONENT IN
terminals of your TV.
2. Using the AV cables (included), connect the AUDIO
(red and white) OUT terminals on the rear of the Blu-ray
disc player to the AUDIO (red and white) IN terminals of
your TV.
COMPONENT AUDIO IN
VIDEO IN
R
Component
Video cable
Back of the unit
Note
= If your TV set supports HDMI, please select
HDMI jack fi rst.
= Depending on the manufacturer, the compo-
nent terminals on your TV may be marked "R-Y,
B-Y, Y" or "Cr, Cb, Y" instead of "PR, PB, Y". The
number and position of terminals may vary de-
pending on the TV set.
Please refer to the userʼs manual of your TV.
= If using Component jacks to connect, please set
the "Video-Resolutions" settings in Home menu,
please refer to page
21.
Notice
ʻCONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINI-
TION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED
IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE
USER SWITCH THE CONNECTION TO THE ʻSTANDARD DEFI-
NITIONʼ OUTPUT. IF THERE ARE QUESTIONS REGARDING
OUR TV SET COMPATIBILITY WITH THIS MODEL 525p DVD
PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.ʼ
Television
L
Audio/Video cable
(included)
g

Connecting to a TV (Video)

1. Using video/audio cables, connect the VIDEO
(yellow)/AUDIO (red and white) OUT terminals on the
rear of the Blu-ray disc player to the VIDEO (yellow)
/AUDIO (red and white) IN terminals of your TV.
AUDIO IN
R L VIDEO IN
Back of the unit
Note
= If your TV set supports HDMI, please select HDMI
jack fi rst, then select Component as the second choice.
= Noise may be generated if the audio cable is placed
too close to the power cable.
= The number and position of terminals may vary
depending on your TV set. Please refer to the userʼs
manual of your TV.
= The video output resolution should always be 576i
(PAL) if you select this connection mode. You need not
to set the resolution in Home menu anymore.
= If you select another resolution by mistake, the
screen will be black and display: "Please connect HDMI
cable". At that time, please keep pressing the [HOME]
button for more than 5 seconds, then the screen will
return normal again.
Television
Audio/Viedo
( )
11