Horizontal Lens Shift (Example Only) - Runco LightStyle LS-12d Installation & Operation Manual

100% Width Lens Shift
(1.0 x W)
Note: This is a general example of lens shift. Lenses vary in their shift capabilities. No particular
lens or projector is used in this example.
Figure 3-4. Horizontal Lens Shift (EXAMPLE ONLY)
Vertical Lens Shift: The LS-12d zoom lenses (Proteus 2 through 6) provide up to 65% of
vertical lens shift in either direction (up or down). For example, with a 96 x 54-inch (16:9)
screen, you can shift the image up to 35.10 inches (0.89 meters) below the screen center.
(Vertical lens shift is not possible with the Proteus 1 lens.)
Horizontal Lens Shift: The LS-12d zoom lenses (Proteus 2 through 6) allow up to 30%
of horizontal lens shift in either direction (left or right). For example, with a 96 x 54-inch
(16:9) screen, you can shift the image up to 28.80 inches (73.15 cm) left or right of the
screen center. (Horizontal lens shift is not possible with the Proteus 1 lens.)
LightStyle™ LS-12d Installation/Operation Manual
50% Width Lens Shift
(0.5 x W)
Screen Center
0%
Screen Width (W)
25
Installation