Table of Contents
Advertisement
Connect your video sources to the DHD Controller as shown and described in the
sections that follow.
HDMI Source Connections: See Figure 3-3.
Use the HDMI inputs whenever possible. This ensures the highest
Tip
video quality because the signal is carried in the digital domain
throughout the entire signal path, from source component output
into the projector.
You can also connect computers with DVI output to these inputs.
Note
Refer to Supported Timings on page 95 for a list of compatible
input signals.
HDMI
AV OUT
Figure 3-3. HDMI Source Connections
Lightstyle™ Series LS-100d Installation/Operation Manual
RIGGERS
RIGGERS
Display Control
Display Control
USB
USB
RS-232
RS-232
2
2
3
3
To Accessory Box
To Accessory Box
HDMI Out
HDMI Out
HDMI 1
HDMI 3
To Display
To Display
Video 2
Video 2
Video 3
Video 3
HDMI Out
HDMI Out
Ethernet
Ethernet
HDMI 2
HDMI 4
Audio Only
Audio Only
HDMI
AV OUT
HDMI sources (BD, DVD, DTV Set-Top Box etc.)
IR
IR
HDMI
AV OUT
HDMI
AV OUT
21
Installation
Connecting Source
Components to the DHD
Controller
Advertisement
Table of Contents
