Programmable Features - Jeep Compass User Manual

ELECTRONICS
Compass Calibration
• This compass is self-calibrating, which eliminates the need to set the compass
manually. When the vehicle is new, the compass may appear erratic and the EVIC
will display "CAL" until the compass is calibrated.
• You may also calibrate the compass by completing one or more 360 degree turns (in
an area free from large metal or metallic objects) until the "CAL" message displayed
in the EVIC turns off. The compass will now function normally.

PROGRAMMABLE FEATURES

Electronic Vehicle Information Center (EVIC) – If Equipped
• The EVIC can be used to program the following Personal Settings. Press and release
the MENU button until Personal Settings displays, then press the DOWN
button to scroll through the settings. Press the SELECT button
the setting.
• Language
• Auto Door Lock at 15 mph (24 km/h)
• Auto Unlock On Exit
• RKE Unlock Driver's Door 1st
• Sound Horn With Lock
• Flash Lamps With Lock
• Headlamp Off Delay
Key Fob Programmable Features
• The following features may also be programmed by using the Key Fob transmitter or
the ignition switch and driver's door lock switch.
NOTE: Pressing the LOCK button while you are inside the vehicle will activate the
Vehicle Security Alarm. Opening a door with the Vehicle Security Alarm activated will
cause the alarm to sound. Press the UNLOCK button to deactivate the Vehicle Security
Alarm.
Unlock On First Press
• To unlock either the driver's side, or all doors, on the first press of the UNLOCK
button:
• Press and hold the LOCK button for at least 4 seconds, but no longer than
10 seconds. Then, press and hold the UNLOCK button while still holding the
LOCK button.
• Release both buttons at the same time.
38
• Key Off Power Delay
• Confirmation of Voice Commands
• Illuminated Approach
• Hill Start Assist (HSA)
• Display Units In
• Automatic Compass Calibration
• Compass Variance
to change