Recording Mp3 Or Wav Data - Boss MICRO BR Owner's Manual

Digital recorder
Hide thumbs Also See for MICRO BR:
Table of Contents

Advertisement

Recording MP3 or
WAV data
Here's how you can record the sound from the
inputs directly as MP3 or WAV format data.
1.
Press [MP3/TRAINER] to MP3 mode.
Switches to MP3 mode; the display will
indicate
2.
Select the input source as described in
"Selecting an instrument to record" (p. 41).
3.
Press
.
The Type parameter will appear. You are
now in recording-standby mode.
fig.Disp-CENTER-ADJ.eps
4.
Use VALUE [-] [+] to select the Type
parameter (recording format) you want to
use.
Type
Explanation
MP3 64 kbps
The audio quality will be lower, but
you can record in MP3 format for an
extended length of time with a
smaller amount of data.
MP3 128 kbps
This is the normal audio quality in
MP3 format.
MP3 192 kbps
The amount of data will be larger,
but there will be minimal loss of au-
dio quality in MP3 format.
WAV
Record in WAV format.
• When recording in the WAVE format, 44.1
kHz, 16-bit recordings are produced. This
setting cannot be changed.
• As for both MP3 and WAV format, the
sound is recorded with the stereo.
• Rhythm and reverb are not available in MP3
mode.
• If you press the MICRO BR's buttons while
recording via the internal mic, clicking
sounds resulting from the operation of the
buttons may also be recorded along with the
rest of the sound. This is not a malfunction.
(the MP3 screen).
Section 5. Using MP3 player
• The playback volume is set lower than the
monitoring volume of recording,
beforehand, the purpose is to prevent the
entire sound being distorted when the input
sound and the playback sound are mixed.
About the file name
The file name will be assigned as follows
when the MP3/WAV file is saved.
(Ex.)
BR_001.MP3
:
BR_999.MP3
The file name will be the input source name
plus a sequential number and the extension
.MP3 (or .WAV).
If you want to specify a file name press
[TR4] (NAM) in step 3.
The file name setting screen appears.
fig.Disp-CENTER-ADJ.eps
If an identically named file already exists,
the display will ask "Overwrite?"
5.
Press
.
Recording will begin.
fig.Disp-CENTER-ADJ.eps
6.
Press [STOP].
Recording stops. The recorded data is saved
in the MP3 folder.
99

Advertisement

Table of Contents
loading

Table of Contents