Boss MICRO BR Owner's Manual page 50

Section 1. Recording and playing back
5.
Press [TR1] several times to make "REC"
appear for track 1.
fig.Disp-RecTrack-1.eps
Track 1 will be the recording track.
6.
Press [EXIT].
7.
Press CURSOR [
Track Level screen, and set the Tr1 Level
to 100 (p. 35).
fig.Disp-TR1-LEVEL.eps
8.
Play back the song, and use the INPUT
LEVEL dial to adjust the volume of the
input source.
Listen and compare the input source with
the track to be re-recorded, and adjust the
INPUT LEVEL dial so that there is no
difference in volume.
9.
Move to a point slightly earlier than the
point at which you want to begin re-
recording.
10. Press
and then press
begin recording.
When you press
record the region between punch-in and
punch-out. Re-record your performance.
After the repeat, playback will begin from
one measure ahead of the punch-in location.
Listen to the re-recorded result. If you're not
satisfied, press
performance again.
11. When you're finished recording, press
to stop.
50
][ ] to access the
to
, you'll be able to
and re-record your