Boss MICRO BR Owner's Manual page 71

DELAY (DLY)
This creates a thicker sound by applying a
delayed sound to the direct sound.
On/Off
This parameter turns the delay effect on/off.
Type
This Parameter selects the type of delay.
Parameter Explanation
SINGLE This is a simple delay.
TAP The delayed sound is panned across the
left and right channels. This will be effec-
tive when stereo recording.
Dly Time SINGLE: 1 – 1000 (ms)
This parameter adjusts the delay time (i.e., the
interval for which sound is delayed).
Feedback
This parameter adjusts the amount of feedback.
Changing the amount of feedback causes the
number of time the delayed sound is repeated to
change as well.
E.Level
Adjusts the volume of the delay sound.
OFF, ON
TAP: 1 – 500 (ms)
0 – 100
0 – 120
Section 3. Using effects
ENHANCER (ENH)
By adding sounds which are out-of-phase with
the direct sound, this effect enhances the
definition of the sound, and pushes it to the
forefront.
On/Off
This parameter turns the enhancer effect on/off.
Sens
Adjusts the manner in which the enhancer will be
applied relative to the input signals.
Freq
Adjusts the frequency at which the enhancer
effect will begin to be applied. The effect will be
made apparent in the frequencies above the
frequency set here.
Mix Level
Adjusts the amount of phase-shifted sound of the
range set by "Frequency" that is to be mixed with
the input.
Lo Mix Lvl
Adjusts the amount of phase-shifted sound of the
lower range that is to be mixed with the input.
The frequency range in which the effect is
applied is fixed.
Level
Adjusts the volume of the enhanced sound.
FLANGER (FX)
This produces a flanging effect that gives a sort of
"twisting" character to the sound.
* This effect can be used when the FX "Type" parameter
is set to "FLANGER."
On/Off
This parameter turns the flanger effect on/off.
Rate
Determines the rate of the flanging effect.
Depth
Determines the depth of the flanging effect.
Manual
Adjusts the center frequency at which to apply
the effect.
Resonance
Determines the amount of resonance (feedback).
Increasing the value will emphasize the effect,
creating a more unusual sound.
OFF, ON
0 – 100
1.0 – 10.0 (kHz)
0 – 100
0 – 100
0 – 100
OFF, ON
0 – 100
0 – 100
0 – 100
0 – 100
71