Side Panel (Right) - Boss MICRO BR Owner's Manual

Side panel (right)

fig.panel-R.eps
1
2
1.
GUITAR IN Jack (Phone type)
This is a high-impedance input jack for
directly connecting your guitar or bass.
2.
LINE IN/MIC Jack (Stereo mini type)
This is an input jack for analog audio
signals.
The output of your portable audio player,
other audio device, or microphone can be
connected to this jack.
If you connect a monaural plug to this
jack, the audio will be input to the track
that's assigned to the L-channel (left).
If you're using a miniature condenser
microphone that supports plug-in power,
turn the MICRO BR's "PlugInPower" setting
on.
"Using plug-in powered microphone" (p. 116)
If you connect the other device (dynamic
microphone etc.), you must turn off the
PlugInPower.
3
4
What is a plug-in powered
condenser mic?
A plug-in powered condenser mic is a small
condenser mic that requires a power
supply.
Some mics have an internal battery, but
other mics require an external power
supply. The MICRO BR is designed to
supply power to plug-in powered mics that
need an external power supply.
• A voltage of approximately 2.5 V can
be supplied from the LINE IN/MIC
jack. Unlike phantom power, this
cannot supply 48 V.
• If PlugInPower is turned ON, you
must connect only a condenser mic
that is compatible with plug-in power.
Connecting any other device (dynamic
microphone etc.) may damage that
device.
3.
INPUT LEVEL
This dial adjust the input level. This specifies
the volume of the input source. This will
determine the level that is recorded on the
track.
988
4.
Strap Hole
The strap can be passed through this hole.
Panel Descriptions
19