Patch Tempo; Confirming And Setting The Patch Tempo - Boss RC-50 Owner's Manual

About Tempos

Patch Tempo

From this point, the tempo used when recording a phrase or playing
a patch will be referred to as the "patch tempo."
Moreover, the patch tempo is also used as the guide (p. 39) tempo.

Confirming and Setting the Patch Tempo

You can confirm and set the patch tempo with the following
procedure.
fig.03-050
2-1 2-1
1.
Press [TAP TEMPO] to display "Patch:Tempo."
The tempo is indicated.
fig.03-060d
2.
When changing the patch tempo, use the following procedure.
2-1. Press PARAMETER [
digit you want to change, then rotate the PATCH/VALUE dial to
adjust the patch tempo.
Available Settings: 40.0–250.0
2-2. Press [TAP TEMPO] several times.
The tempo is set to the interval between taps of the button.
To Set the Patch Tempo using the
TEMPO Pedal
When you press the [TEMPO] pedal several times, the tempo is then
set to the interval between taps of the pedal.
• You cannot adjust the tempo with the TEMPO pedal if the
pedal's function has been changed.
→
"Setting the Functions for the RC-50's Pedals and External
Foot Switches (TEMPO/UNDO/CTL1/CTL2/CTL3/CTL4
Pedal Function)" (p. 70)
• When Synchronized Performance is used to synchronize the
RC-50 to an external MIDI device's tempo, you cannot change
the patch tempo with the PATCH/VALUE dial, [TAP TEMPO],
or the TEMPO pedal.
38
1,2-2
] [ ] to move the cursor to the