Janome Horizon Instruction Book page 92

o o o o o Page Turning
You can select the normal page turning or animated page
turning by pressing the relevant icon key.
o
!0
!0 !0 !0 !0 !0 Formatting the memory
If the internal memory of the machine or USB memory
stick does not function due to damage to the memory
bank, you need to re-enable it by formatting the memory.
To format the machine's internal memory, press the
machine icon key and a confirmation message will
appear. Press the OK key to format.
To format a USB memory stick, press the USB icon key
and the confirmation window will open. Select the USB
port, USB1 or USB2 port where your USB memory is
connected and press the OK key to format.
CAUTION:
Do not turn off the power or disconnect the USB memory
while a warning message is displayed otherwise it may
damage the memory bank.
Press the next page key to show the next menu.
!1 !1 !1 !1 !1 Quiet Mode
If you prefer the machine to run more quietly, turn on this
option so the buzzer sound, start-up sewing speed and
maximum embroidery speed will be set at the lowest
levels.
The quiet mode setting overrules any previous settings
!1
for these parameters.
NOTE:
Custom settings for sound volume, start-up speed and
!2 maximum embroidery speed are disabled, and the quiet
sign will appear on the screen when the quiet mode is on.
!2 !2 !2 !2 !2 Upper Thread Sensor
!3
If you need to run the machine without threads, turn off
the upper thread sensor.
After altering the settings press the OK key to enable the
new settings.
!3 !3 !3 !3 !3 Reset All to Defaults
Press the YES key to reset all the parameters to the
original values (factory settings).
Press the OK key to register the new menu.
89