Table of Contents
Advertisement
FS-8704-13 GE-SRTP
5.4.2 Driver Specific Map Descriptor Parameters
Column Title
Data_Type
Length
Address
Format
5.4.3 Timing Parameters
Column Title
Scada_Hold_Timeout
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 (408) 262-2299 fax: (408) 262-9042
Visit our website: www.fieldserver.com
Function
Data type
Use one of the Data Types
specified in brackets.
Length of Map Descriptor
Ensure that the length does not
exceed the table length in the PLC.
Starting address of read block /
write block
st
The 1
element of each Data type
Table is referred to as address one.
Has no meaning on the server as
the driver responds based on the
nature of the request
The map descriptors should be
considered to be the definitions of
data tables in a PLC. Thus one map
descriptor can be used to respond
to bit or byte requests.
Function
Specifies time server side waits
before responding to client that
node is offline on FieldServer
client side.
E-mail: support@fieldserver.com
Page 13
Driver Manual
Legal Values
Discrete Inputs (%I)
Discrete Outputs (%Q)
Discrete Temporaries (%T)
Discrete Internals (%M)
Genius Global Data (%G)
Analog Inputs (%AI)
Analog Outputs (%AQ)
Registers (%R)
%SA Discrete
%SB Discrete
%SC Discrete
%S Discrete (%S)
1 - 1000
1 , 2 , 3
Positive whole numbers
N/A
Legal Values
>1.0s
Advertisement
Table of Contents
