FieldServer FS-8700-01 Driver Manual page 20

FS-8700-01 Modbus RTU/ASCIIFS-8700-01_Modbus_RTU Driver Manual

Device is D11, select 5-digit address, add the FieldServer virtual Node ID to station address

Set up poll record

SAVE the configuration.

Open "Startup"

Open "Mission Control" from the "Apps" menu and confirm Fix is polling.

To display the data create a link in Fix draw, add link, data link.

Give it a tagname, allow data entry, numeric entry and set enable option.

If tag is not in database, select "Add", choose "AR". Then set output enable, device MB1, I/O address d11.

Save the settings

Use "Quickview" from the "View" menu to confirm the reading of data without ??? appearing

Change the value and wait a few seconds to ensure the change really occurred.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
Page 20 of 22